Subject: : fine tuning the 555 trigger circuit.
From: Rotary Engine
Date: 3/17/2009, 2:52 AM
To: AAA Put this in the To box


 I got it down to about 50 RPM or so using the new ABS
 sensor to trigger the 555 fuel injector. It took a couple
 of diodes and a resistor. Next change will be to check
 the fuel flow meter circuit. Then I will do another batch
 of PC boards for further testing

 Here is the latest version. A few more minor changes on the way.
 When Larry gets the new slide throttle done we will go back
 on the dyno with the RX8 p-port engine and this 555 EFI system.
 I have a good slide throttle I can use so no rush on Larry's.

 Things are not going as fast as I like as I am spending mornings
 installing a new central heating system in our house.

 Paul Lamar


 Radiant, or forced air?

 Matt-

 Forced air. The attic is only a foot and a half high at the highest :)
 I had to build a dog house on the roof to get the furnace up
 there.


 Paul Lamar


California architecture... :)

Matt-

You got it. Never in the history of man has the price of houses
been so high for so little :)

Paul Lamar


I actually drove through Santa Paula at the end of last month..  I
thought about trying to get in touch with you, but was majorly
crunched for time - was Saturday evening and had to be back at work on
Monday morning..


Matt-

Your computer is doing it again :)

Paul
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.