Subject: Something to try P-port tuning
From: Rotary Engine
Date: 3/19/2009, 1:29 PM
To: AAA Put this in the To box
CC: Tracy Crook <tcrook@rotaryaviation.com>

Mark Rocky Mountain,

Disconnect the manifold tubes.
Set all the table settings up a couple of number from what they are now
and try it again. Keeping doing that until it runs well at max static RPM.

The computer will think the throttle is wide open all the
time. So the top numbers are probably the most important.
You can try doing it to just the top numbers first.

What is the possible range of numbers?

Paul Lamar
 --
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.