Subject: I want to make a rotary engine
From: Rotary Engine
Date: 3/20/2009, 1:09 AM
To: AAA Put this in the To box


QUOTED TEXT:
"If you have a clean sheet for rotor development please
investigatewhere the pocket should be for best torque. An
inventor I correspond
with believes that a trailing edge pocket would make more
power due
to the position of the rotor and e-shaft. He also
believes that gearing
the rotor to the e-shaft would harness more torque by
using the inertia
of the rotor(s) as well as the "push" from combustion. He
also has an
idea to eliminate unburned fuel at the leading edge.
Dan F


Got any drawings on this "gearing the rotor to the e-
shaft" Dan?
Paul Lamar"



also with regards to dan's inventor's idea of physically gearing the rotor
to the e-shaft as in (if i understand correctly) effectively making the
eshaft and rotor one solid unit is not physically feasible. the trochoid
shape and change in volume of the chamber depends solely on the idea that
the ratio of rotor rotation to shaft rotation is something other than 1:1,
which if i am interpreting it correctly what your friend proposes. in other
words they must spin at different rates.

han nguyen
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.