Subject: RB alloy end housings
From: Rotary Engine
Date: 3/20/2009, 4:24 PM
To: AAA Put this in the To box


Paul, What can you tell me about R B's aluminum side
housings?
Any good? Do they work? Know anybody that has them in
service?
Do you think they are a good idea?

Skip

We have no feedback on them. I have no idea. I guess they
are too expensive
for most people. If they work they would be ideal for a one
rotor
as that is where engine weight is critical.

BTW if I were Jim Mederer I would build or buy a LSA and
install a one rotor p-port. It would be great PR and people
would flock to
it simple because a Rotax 912 is now $20,000 US. Jim is a
pilot and has
built, flown and owns a Glasair.

The two rotor weighs about the same as an IO-360 installed
so there is
little incentive to reduce engine weight there. One might
wind up with  an aft CG problem.


Paul Lamar

Couldn't you compensate for the lighter weight by mounting the engine
further forward, and making an appropriate increase in the tubing
used to support the engine. Extra space under cowl allows easier
service, longer nose = less drag?
C. Smith


Yes but.
More work as now you need a new cowl.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.