Subject: RB alloy end housings
From: Rotary Engine
Date: 3/20/2009, 4:35 PM
To: AAA Put this in the To box


Paul, What can you tell me about R B's aluminum side housings?
Any good? Do they work? Know anybody that has them in service?
Do you think they are a good idea?

Skip

We have no feedback on them. I have no idea. I guess they are too expensive
for most people. If they work they would be ideal for a one rotor
as that is where engine weight is critical.

BTW if I were Jim Mederer I would build or buy a LSA and
install a one rotor p-port. It would be great PR and people would flock to
it simple because a Rotax 912 is now $20,000 US. Jim is a pilot and has
built, flown and owns a Glasair.

The two rotor weighs about the same as an IO-360 installed so there is
little incentive to reduce engine weight there. One might wind up with
an aft CG problem.

Paul Lamar


Paul, Yes the weight of the one rotor is heavy. Its about 160# with a belt
drive. No exhaust, radiator. Although I'm not trying to build an a/c engine,
my buddy put one of mine in a Sky Ranger. I think its too heavy. We were
thinking of those housings as an answer, but can't find any testimonials.

Skip Gorman

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.