also with regards to dan's inventor's idea of physically gearing the rotor
to the e-shaft as in (if i understand correctly) effectively making the
eshaft and rotor one solid unit is not physically feasible. the trochoid
shape and change in volume of the chamber depends solely on the idea that
the ratio of rotor rotation to shaft rotation is something other than 1:1,
which if i am interpreting it correctly what your friend proposes. in
other
words they must spin at different rates.
han nguyen
Han,
It can be done if there is no trochoid using other ways of compression.
George (down under)
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.