Well as long as you start with 50 million dollars building
your own Wankel should be no problem. You know what they say
about aviation. "If you want to make a small fortune
start with a
large one" :)
Paul Lamar
Oh yes, that is one very famous quote
in auto racing. My personal
favorite is "I know there's money in racing, I put it
there." Back to
the subject, $50 million we do not have, and if we did,
that large sum
would be going into certification. Granted, we may be
fools for putting
so much time and money into a project with such a poor
history, however,
we are still willing to go forward with our plans of
making an aviation
rotary engine despite the great opposition involved with
such an
undertaking.
I am not here to start an argument about what we can or
cannot do,
merely collecting advice and opinions of other aviators
to help
increase our chances of success.
Vladimir
You will forgive us because we have seen it all before.
Keep quiet and produce the goods.
Just hang in here awhile and you will learn all you need
to know.
Paul Lamar
Vlaldimir,
My personal favorite would be a 150hp single rotor NA @ 150 lbs.
- all
aluminium, water cooled.
Wear surfaces are important, det gun seems the best, or steel.
If designing from scratch, a wider lighter rotor. The
Mazda 16X has gone
back to the 12A width but bigger with a larger eccentric.
It can be done- best of luck, looking forward to reading about your
achievements.
George (down under)
Hi Vlaldimir,
Avoid the mistakes of your predecessors.
Mistral Engines is a hugely
brilliant company with an outstanding product line. BUT, look at the
aircraft statistics available thru the FAA. The marketplace is
shiftingtoward Experimental light sport aircraft. Amateur built
new registrations
are rising strongly. Certificated PISTON powered new
registrations are
barely stable (even when adjusted for the current economic downturn).
Certificated TURBOPROPS are on the rise but beyond our scope
here. The
certificated PISTON powered aircraft industry is mired in it's own
business model and for insurance and liability reasons is unable to
change as Mistral is finding out. The Rotary IS different and anything
different in the certificated world is suspect...no matter how good!
My suggestion is to tailor your business plan
toward the EXPERIMENTAL
marketplace ONLY. If you doubt the profit potential in this market,
google " R V " and check up on Dick VanGruevnson ( 6,000 planes
FLYING,only Dick knows how many kits sold still on the ground).
Mistral has a
CERTIFICATED engine package that is a very hard sell into an
inflexiblecertificated industry and at the same time is way over
priced for the
experimental marketplace. Their certification costs have to be
amortizedinto the engine pricing and that puts them in the same
engine selling
price bracket as the venerable old Lycoming or Continental
competition.With no rotary cost advantage, a slightly higher
rotary BSFC, and a
customer mindset that history has proven the horizontally opposed
piston engine viable, airframe manufacturer's have no incentive
to change.
BSFC....This is the place where if you
seriously want to make a
difference, You CAN make a difference. There are suggestions on this
newsletter that are "application specific". It would be nice to
incorporatesome of them but your goal should be to create as
broad an accomplishment
as possible for the money invested. Investigate
"TURBOCOMPOUNDING". Paul
and others on this list have done extensive background on this subject
and will be here to help you in any way. Successfully done, this will
give ALL rotary applications the advantage rotaries need to give
airframemanufacturers that reason they need to justify designing
around the
rotary engine. The Mazda rotary engine work and works well, you can
CHANGE it easily enough, but IMPROVING it will be very
difficult. You
can move the water pump, build in an alternator, charge cool it (not
historically successful),etc....so what?
BUT REDUCE THE FUEL COMSUMPTION 25 % and the world WILL notice.
Dave M
Brilliant essay Dave.
Thanks.
Paul Lamar
Vladimir,
From Dave M
"TURBOCOMPOUNDING". Paul
and others on this list have done extensive background on this subject
and will be here to help you in any way. Successfully done, this will
give ALL rotary applications the advantage rotaries need to give airframe
manufacturers that reason they need to justify designing around the
rotary engine.
And you why TURBOCOMPOUNDING Because the rotary engine has no exhaust
valve. May I remind you :)) That is THE ADVANTAGE over the other
aircraft engines. A LOWER BSFC over ANY other turbocompouding aircraft
engine. Your friend/partner is right Vladimir :))
Marc Joseph
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.