Gentlemen,
   I have reduced the price of the two rotary engines I have for
sale. This will be my minimum acceptable bid on eBay if it comes to
that.

ENGINES
New Mazda RX8 short block-  -  - $4200

Factory new 2004 Mazda RX8 forth generation Renesis crate engine
completely modified for aviation by Bruce Turrentine.
4-port intake, 3-port exhaust.
10:1 new, eye brow ported, high compression rotors
Has the required RWS PSRU flexplate
New Viton O-ring seals
Blocked oil ports
Black and yellow powder coated
Wt. as shown 176 lbs.
225 hp @ 7500 rpm (+/- depending on intake, exhaust design)

randy echtinaw <rjechtinaw@toast.net

You might find it easier to sell Randy if you called it
an RX8 engine. I think 13B may be confusing people.
One picture shows everything and the other just the
short block. What is for sale?
Are they the stock RX8 apex seals?

Paul Lamar


Paul,
  You omitted this part of the sale.

"Slightly used Mazda RX8 4 port-   -  - $1500

2005 Mazda RX-8 4-port Renesis engine used for factory emissions
testing only, never installed in a car. Does not have an exhaust
manifold otherwise it is a complete engine. Both of these engines are
in excellent shape. Roll over nicely and with very good compression."

I have two engines both for sale
Thank you

randy echtinaw <rjechtinaw@toast.net


--------------------------------------------
Sorry.
OK that clears it up.
That is a great price on the slightly used RX8 engine.
I am tempted but I have one already converted to a
P-port and running. 250 HP at 7500 RPM.

Where are you located as that will affect the shipping
cost?

Paul Lamar

Nashville, Michigan 49073
randy echtinaw <rjechtinaw@toast.net