Paul,

I was reading about rotary engines on the AREN and am considering installing
one in a Series 1 Lotus Elise to replace the standard Rover K series.

Im thinking of an RX8 13B with 270Hp. In a 700kg Elise this should be fun.

Was reviewing the technical data and haven't been able to find any detail on
the bellhousing bolt hole pattern as I will need to make an adapter plate to
the gearbox. I notice you have quite a few CAD drawings and models/layouts
on the site and was wondering if you would have this information and would
be willing to share it.

Look forward to your response.


Oh and I would like to subscribe to the newsletter as well.


Cheers,

Stuart

I would love to have something like that. Unfortunately
our gov does not allow it.

Your in luck Stuart. Here is a dwg on the subject
and some pictures of the end housing.

I recommend an RX8 p-port with a Weber 48 mm carb.
300 HP at 9000 RPM. Idles as well as a 13B.
http://www.youtube.com/watch?v=LkKw72dZ2yc
If you need more info on it let me know.

Paul Lamar