Old message. 06/03/2007 05:49 AM
---------------------------------------------------------
Paul,
I have a kit for a Holly that is specifically made to allow leaning.  I
think it is for a 2-BBL.  I saw a V-6 Chevy installed in an RV-6 that
was using this method, so I have to assume that it worked.  Do you know
if these are still available?  If you don't want to use a Holly, then
maybe this unit could be made to work with your latest version of the
slide-throttle which incorporates the fuel bowl.

Mark Steitle.

That is a good idea Mark. I wonder if that company is still in biz.
It is not clear to me how it works.

Paul Lamar ...No rotor no motor.

The bottom of the bowel is where the main jets are. It looks like that
extra cylinder is a solenoid. It would stand to reason the pulse the
main jet via that solenoid. I see they still have the accelerator pump
on the side.

-dave

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.