Subject: Jet carb and Helley 2 barrel
From: Rotary Engine
Date: 3/31/2009, 4:31 PM
To: AAA Put this in the To box


I notice Summit as a 500 CFM two barrel called a Jet for $285
in the 2007 cat.
Holley also has a 500 CFM 2 barrel for $269.

Now if we can just figure out how to lean em.
The Holley might be easy as it has a screw in adjustable float
valve.
http://www.holley.com/types/Street%20Performance%20-%20Traditional.asp

Paul Lamar
-

Don't know if it was a mistake or you didn't catch it, but the
link for the Holley carb you have is a "dry" float bowl
adjustment only. That wouldn't really give you any on-the-fly
adjustability (no pun intended) in regards to float level.

Vlad

The reason that is (I think) is the screw is not sealed.
So a change would have to be made with a sealed shaft
turning the threaded float needle seat in and out.
The fuel pressure regulators have similar problems.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.