I notice Summit as a 500 CFM two barrel called a Jet for $285
in the 2007 cat.
Holley also has a 500 CFM 2 barrel for $269.
Now if we can just figure out how to lean em.
The Holley might be easy as it has a screw in adjustable float
valve.
http://www.holley.com/types/Street%20Performance%20-%20Traditional.asp
Paul Lamar
I have a device that allows leaning of the 2 bbl Holley. It replaces
the metering body that goes between the main venturi body and the float
bowl
on a 2 bbl carb. I'm not sure exactly how it works though. Best I can
recall, it has an electronic control with a knob that you turn. I'll look
at it tonight and take some pics.
Mark S. (Cent. Texas)
Paul,
the holley version may no longer be available, but here is the aftermarket
version of the same thing.
http://store.summitracing.com/partdetail.asp?autofilter=1&part=PHP%2D15001&N=700+4294821996+115&autoview=sku
Larry
Would it be safe to assume that provided you were able to install
one of the adjustable jet plates or blocks that you could use a
carb that does not offer external float bowl height adjustment?
If that is the case, you could potentially use a 2bbl Holley
marine carb. While it does cost more than the street 2bbl,
it should be optimized for conditions closer to those seen in aviation.
Vlad
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.