Subject: 4 rotor, 3/4 F2G Corsair- Bell gear box.
From: Rotary Engine
Date: 4/12/2009, 12:41 PM
To: AAA Put this in the To box


 Ok, I have been having some trouble/ controversy trying to figureout
 how much a 4 rotor, the drive, and, well just about everything from
 the firewall forward is going to weigh.  I have seen some prettynice
 3 rotors out there but I'm still wondering what we are looking atfor
 a competitive 4 rotor with aluminum housings, weight wise???  Anyone?
 By the way, if any of you are wanting to design and build your own
 plane, Martin Hollmann's book "Modern Aircraft Design" is fairlyeasy
 to understand and follow.
 Ok, hope all of you are doing well!
 Jeremy

 200 pounds bare two rotor aluminum block.
 Four rotor 400 pounds. Add 200 pounds for misc
 and you are probably looking at 600 pounds firewall
 forward. The trouble is there are no aluminum parts
 to make a Mazda stock three rotor let alone a Mazda based 4 rotor.
 People have made four rotors with 2 rotor center housings but
 it is tricky and entails custom shafts and other parts.

 You might contact these people.

 And see if they will sell you a KKM-508-TW 394 KW (514 HP) turbo
 engine.
 Weight 280 KG or 616 pounds.
 www.wankelsupertec.de
 info@wankelsupertec.de

 3 rotor shown but four rotor possible.
 I would forget the direct injection and just get the
 bare engine and run it on gasoline. A LOT cheaper.
 Better learn to speak East German :)
 Maybe Martin can help translate.

 ---------------------------------------------
 If you go with SuperTec you will be on the leading edge
 no matter what. My suggestion is find a local mechanical engineering
 professor partner at a local college and hire him. That will giveyou
 academic credibility. Then approach Supertec as a joint development
 company
 promising to share all experience. You will have to write technical
 reports from time to time. You can get the real help on here.
 Try to find a Bell 47 helicopter final drive unit and use it as
 a gear reduction. Doug has one but I am sure he does not want to
 sell it.

 Paul Lamar


  Thanks so much Paul!  This is great info.  I will look into the other
  engine as well.  We just like the 4 rotor because the F2G Corsair has
  a 4 row engine only it has 7 cylinders per row!  This engine just
  seems like the right one to use!
  Again thanks for the info and if you have any other ideas for us let
  me know!
  Jeremy



  Paul,

  I think you got the 13B aluminum bare block weight wrong, or
 thisfellow
  is super strong.
  Next is  what the  Bell 47 final drive looks like in use as designed.
  Amazing the final thrust bearing collar and hence the whole
 helicopter
  is hanging on  eight 1/4 " steel studs threaded into the magnesium
  housing.

  Doug in Japan


  Yes you are right. I was thinking of the cast iron version.

  Paul Lamar

 Here is one for you.  What kind of Hp can the Bell 47 take?  Normal
 operating and max?
 Jeremy

 Bell engineers estimated 1000 HP at 6000 input RPM when
 Dave Garber checked with Bell back in 1973. Dave Garber was
 the original rotary powered airplane  builder using Bell 47 gear
 boxes.
 These are 12A engines.

 Paul Lamar

Paul,

So I have called around and I found quite a number of Bell 47 gear
boxes.  Now I have more questions!  :)  Ok, so which one do I use??
Any idea which one Dave used?  There are some for the Franklin 165
and then more for another engine....  ??  Then another guy said that
he didn't think the transmission would work horizontally.   I know we
can use an oil spray type unit for that.
Well, so far I have found a large number out there, just depends on
which one.  One guy in FL would sell me all the parts to rebuild one
(which is what we would have to do anyway) for $6500.  He has a bunch
and he is trying to get rid of them.  He also has a fresh rebuild
with the clutch and fan, which you don't need for $23,000.   :)
This same guy has a SeaWind kit for sale that is @ 50% done.
$65,000, or with the engine and prop $89,000.
Thanks for your help.
Jeremy

That is good news Jeremy. Good work. Several people on here
are interested in that gear box. I was under the impression
the cost was much higher than that. I suspect just about
any version would be OK because it is so over kill. So strong.
The box is very light weight for its size. About the same
weight as Tracy Crooks.

Doug might know the version Dave used as he knows Dave very well.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.