The Holley 500 cfm $300 2 barrel seems to be it
if a way can be found to lean it. There are several options
out there for that.
The main problems are it must be mounted vertically and the height
is rather high so getting it under the cowl is a challenge.
This is one way I have come up with that still gives the right length
tuned intake pipes for an RX8 P-port engine. HP should be well over
200 at 7500 RPM.
This should be quick to build and straight forward to install. Could save as
much as a year compared to electronic solutions.
Paul Lamar
WOW, COOL!!! The modified 3d models look good. What's your take on
the regular Holley 2bbl vs the Marine version? Do you think the
added safety is worth the extra money?
Vlad
I know nothing about the marine version. Can you send
info on it?
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.