The attributes of the marine carbs sound useful for this application--anything
that reduces the potential for fuel vapors in the engine compartment (from
leaks at the throttle shaft or from the flooding/overflow ports) would be a
good thing. I do wonder if the venting of (overflow) fuel into the intake
might not result in taking a longer time to restart the engine in case of
flooding. This isn't a big issue in marine use, but could be more significant
as the altimeter winds down
and we crank away hoping for a restart.
There's a lot to be said in favor of FI--no icing issues, no problems with
aerobatics, and possibly reduced fuel consumption. But a (simple) carb is a
very simple, cheap, readily-understood approach that has served well for
generations.
Mark W.
You bring up a very good point Mr. Mark, pulling plugs mid-flight is definitely
not an option. Does anyone know just how much fuel is required to flood a
rotary as the .5cc every 30 seconds mandated by the US Coats Guard doesn't seem
like very much?
Beside the "potential" safety aspect, Holley states in their ad that "marine
calibration compensate[s] for unique engine loads found on boats." This gives
the implication that the marine version is tuned for constant throttle
operation such as partial throttle or WOT where boats spend the majority of
their time as opposed to transient throttle conditions on cars. Would the more
efficient jetting from the factory be a major factor if a external tuning block
is installed? Would the slightly diminished throttle response be a hindrance in
aviation applications?
The marine 2300 carb is also the ONLY 2300 with electric choke as the regular
ones come with a manual and the circle track ones don't have a choke at all.
Take it as good or bad but one less thing for the pilot to do is usually a good
thing.
Vlad
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.