I notice Summit as a 500 CFM two barrel called a Jet for $285
in the 2007 cat.
Holley also has a 500 CFM 2 barrel for $269.
Now if we can just figure out how to lean em.
The Holley might be easy as it has a screw in adjustable float
valve.
http://www.holley.com/types/Street%20Performance%20-%20Traditional.asp
Paul Lamar
I have a device that allows leaning of the 2 bbl Holley. It replaces
the metering body that goes between the main venturi body and the float
bowl
on a 2 bbl carb. I'm not sure exactly how it works though. Best I can
recall, it has an electronic control with a knob that you turn. I'll look
at it tonight and take some pics.
Mark S. (Cent. Texas)
Paul,
here is the holley brand external adjustment. Just replace the needle with a
new one that has a bellcrank attached. cable operate.
http://www.dougherbert.com/adjustajetkit-p-19502.html?cPath=6_49_51
simple as apple pie for those who want to run a holley.
Larry
Larry, Thanks for the tip. Looks like the
Percy's Adjust-a-Jet Metering Plate will work great
with some modifications.
http://www.percyshp.com/adjustajet.html
Looks like it requires many turns to adjust over a wide
range. See the pdf. Looks like we need to copy the idea
and change the pitch on the screw so a 90 degree change
moves the jet up and down a LOT more. Also will we have a sealing
problem if we do away with the jam nut? We will also need
a lever on the needle.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.