One implementation of a sidestick that is quite simple is
shown in some
pictures at:
http://www.melmoth2.com/texts/Pictures.htm
Scroll down past the engine, etc, til you get to the
sidestick pictures.
Basically it's two longitudinal tubes running along the
sidewall, one
inside the other; the inner one does pitch, the outer one
roll.
Peter Garrison
I don't know what the Seawind comes with but I would be cautious
about reducing the amount of leverage you have. A six inch side
stick is one thing on a cruiser like the Cirrus which is flown on
autopilot most of the time anyway, but in an amphibian there are
situations(rough water) when you need more control force than you
may be able to supply with your forearm. Dan Stanzione
--
Dan
Exactly. Right you are. That is the reason I wouldn't copy Lancair or
Peter's design exactly as I would have to add a complex arm in the rear
to achieve the needed reactive force resulting in more stick throw.
With a central stick I can obtain the same or more benign stick forces
than the standard built-by-the-book kit. The ailerons as designed are a
bit too light but the elevator forces are fine for one handed operation.
Doug in Japan
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.