The Mazda RX8's are one two on the pole at VIR Rolex GT race.
The question is: how soon before the race organizers do something to
handicap the rotary engines yet again?
Paul Lamar
It has to do with who strokes the SCCA best...spelled Porsche.
Ron G
No Doubt about it. Porsche has a lot of pull.
What I can't figure out is how all the RX8's wound up in the back of the
pack after a yellow pit stop mid race. Sylvain in the 70 found himself
dead last and worked all the way back up to second at this point that I
am watching now. He passed about one or two cars per lap.
Hey John D what happened?
BACK to the TVIO to see who wins. We need a separate race for the GT
cars.
Paul Lamar
-
Moral of the story is that qualifying doesn't matter in endurance
racing.
I don't think Porsche isn't sweating too much over the RX8's with
Pontiac's 1,2 in GT. Personally, I'm amazed at Porsche's relatively poor
performance at VIR compared to their blow-out at Daytona.
Vlad
The RX8 came in third from last in the middle of the race.
The Pontiac's are now probably using the 7L LS7 Chevy motor.
I saw the LS7 at the PRI show in Orlando in December 2008.
It has a forged crankshafts and titanium rods.
Sodium cooled exhaust valves and titanium intakes.
They did this to get the red line up to 7000 RPM.
Peak power happens at 6300 RPM. Makes a good 400 HP aircraft engine for
a couple of hundred hours :)
All this is a first for Chev LSx engines. Prior ones had cast
everything internal.
Crate engine price
is about $15,000 for the Chev 7L LS7 with injectors, intake and exhaust
manifold less computer. A real bargain but you better buy one while you
can still get them. HP is 500 for the normally aspirated LS7.
What I want to know is; since when is a seven liter engine a "Small
Block"? :)
The 3.9L Mazda three rotor is probably putting out only about 450 HP at
10,000 RPM so no telling how much at the mandated red line of only 8,500
RPM . Mazda should really start putting the 3 rotor in the stock RX8
street car.
Everything counts in endurance racing. If you can go faster on the track
you can win all other things being equal. The Mazda engine is absolutely
reliable. I cannot remember the last time a Mazda rotary had engine
failure in any race. The question is: why where they last in the middle
of the race after qualifying on the pole? They must have had trouble in
the pits.
John D, what happened?
Paul Lamar
Hello Paul and Faithful...
It was actually quite a good day at VIR today. Getting a third place
and being on the podium was a strong outcome and what we needed in the
championship points race. It was very good for us to have a customer
car sit on the front row of the grid with us. Proves the strength of
this package and the ability for a customer team to purchase the package
and be competitive.
The car was great in qualifying and was a dream to drive today. We led
early on and will continue to work on the chassis and work with the
folks at Pirelli to help us on the tires. Both the series and the tire
folks are helping us in many ways.
The series has worked hard to level the playing field and that is simply
how things work.
We actually had zero troubles all day...just a bit tough in traffic and
got held up a few times. Our guys were fantastic in the pits...and we
were simply on a different sequence than the lead group in hopes of
catching them out of sequence in the end.
All in all a good day and we pack up and head to New Jersey for another
2 hr 45 min race next Sunday...stay tuned...
Thanks! John
This is the John D I had in mind :)
Thanks John.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.