Subject: Mass air flow sensor and hair dryer.
From: Rotary Engine
Date: 4/30/2009, 6:13 PM
To: AAA Put this in the To box


Just to illustrate how well a mass airflow sensor works my wife loaned me a
her hair dryer. Here is a short video clip. The dashes in the scope trace
are due to the video camera shutter. The dryer is set on cold air of course.
The voltage jumps up to about 2 volts just from the flow of the hair dryer.

Paul Lamar


Paul:

Isn't science wonderful!!!

George Lazik

Yes it is. Beats sanding on a gup airplane :)

Paul Lamar

Paul,

Ok I understand you. You are the explorer, innovator type.  Endless
curiousity that detracts you from doing the druggery work of building
the plane.  I can understand that completely, especially since you
choose a KIS crusier.  Sanding my airplane is a cool seasonal thing, and
big ordeal.  I get skin rashes around the dust so I have to suit up
head to toe, with ear plugs, ski hat, taped on gloves, goggles and
respirator and use a modified orbital sander connected to an industrial
vacumn cleaner.  Still I look like frosty the snowman and the dam dust
gets on everything.  I then had to build a dedicated sanding room in my
workshop. You will as well, plus it will have to be air conditioned with
a humidifier to keep down static. You definitely don't want that stuff
in or on your shop machinery, or lungs.

Glass homebuilt projects are time intensive and as I have learned are
only as good as the molds the factory created.  Mis matches and
'about' joints are incrediably time consuming to fix, patch and blend
in. That is the frustration of glass projects.  I hear the Lanceair
parts fit together very well however, not so the SeaWind.

This is not my first glass fiber project, or second either, and I have
accepted the fact that to get a quality final finish it is cheaper and much
faster to hire a pro.  I can sand the gel coat off, do the lay-ups, fill
the pores and rough sand again.  To try to do the final sanding is a
waste of time because invariably the local pros laugh at my finish and
start over anyway. The results of a good body shop worker is amazing.
These guys are true craftsmen and work by touch as well as sight.

Since we are all giving our 2 cents worth about how you should spend the
next three years of your life, how about selling the KIS  project and
getting an RV-8 that someone has already finished or nearly finished?
This will give you a stable safe platform in which to test your engine
and engine modifications.

Doug in Japan
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.