Hi Paul


I made my first virtual model, based on the math I send you last times.

I am looking for practical data could you guide me to some websites or
books,

if I would like to make a small one for myself? (not to theoretical)

Could you guide me on a couple of things? physical dimensions which are
important.



1.       I am looking for some practical dimensions for rotors (width,
triangle size, triangle side radius)  and housings ?

2.       are there rough schemes regarding (volume) motor size / BHP

3.       what are typical gear ratios between the rotor and the fixed
bearing.

4.       what is a typical eccentricity

5.       what is to be considered as stroke volume? (is there a standard
definition)

6.       what is there to know about the seals and how to cool and grease
them.

Thanks

Gino De Baerdemaeker

Farman Engineering bvba


Get the 1971 book Rotary engine from this site.
http://foxed.ca/foxed/index.php?page=rx7manual

Get the seals pdf from this site.
http://www.rotaryeng.net/interesting.html

http://www.rotaryeng.net/seals.html

http://www.rotaryeng.net/   TECH PAPER DOWNLOAD SECTION

Paul Lamar