Subject: 2nd gen mass airflow sensor. Low cost.
From: Rotary Engine
Date: 5/13/2009, 6:45 AM
To: AAA Put this in the To box



I just ran across this data on the 2nd gen RX7 mass airflow sensor.
Bosch wrote it up as part of the L jetronic injection system manual.
I suspect it is made by Denso under license and installed
in 1986 to 1991 RX7's. I don't think it is a computer.
I think it is similar to a 555 system. All hardware and no
software.

Perry Mick has been flying this system for years in his Long EZ
with hundreds of hours.

It is very reliable. He has tricked the ECU into thinking it is
still in  car. He has even installed an RX7 instrument panel
in the cockpit.

There are probably over 100,000
of these systems out there. They are real cheap I suspect.

Paul Lamar


I think they are cheap from a junkyard or used, but they charge a
ridiculous price for a new replacement.
The flapper drives a potentiometer. A fixed voltage is supplied to the
potentiometer by the ECU and the variable voltage read back. I took some
data on it long ago, it's non-linear.

This July will be the 10th anniversary of the first flight. Over 700
hours accumulated.

The engine always started flawlessly but it's been getting harder to
start lately, and it is worse the longer it sits between flights. It's
like the engine is running on one rotor for a few seconds before the
second kicks in. Originally I thought maybe the fuel injectors were
leaking fuel into the engine even though I shut down the engine by
killing the fuel pumps. I think I disproved that when the engine
wouldn't even fire until the fuel pump was turned on. Now I think the
fuel injectors are "sticky"and start working some time after startup
because of the vibration. These are very old injectors that have been in
continuous service since 1986! I suppose it's possible to clean them but
I'm going to get some new ones on order.

I wonder if the pre-mix oil in the fuel might create an issue for the
injectors. Doubtful since I was mixing oil with the gas for many years
before this showed up, and I don't think anyone else has had problems
with premix affecting injectors.

Perry

I'll send you the pdf Perry.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.