Subject: Holley 4 bbl to 20B Intake
From: Rotary Engine
Date: 5/13/2009, 6:50 PM
To: AAA Put this in the To box


Paul,

Here are a few pics of the adapter I built for my 20B to allow me to run it
on a test stand without an EC-2, using a 600cfm Holley 4 bbl carb.  Nothing
fancy, but it worked.  Little did I know that we would be discussing this
eight years down the road.  Best I can tell from your air-flow charts, the
3-rotor would need at least a 550 cfm carb to run up to around 7000 rpm.

Mark S.

Wow! that looks real professional Mark. Good work.
Organ pipe tuned no less.

Paul Lamar
 --
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.