I am also thinking of mounting
one of the cheap $80 12 bit AD to D data acq system back there
with the USB interface to monitor the 555 EFI system and its
sensors on a notebook computer. Add a few ten dollar pressure
sensors and lots of things are possible. The A to D can also handle
the fuel flow read out and fuel totalizer in software.
http://www.hytekautomation.com/
I just came up with another idea using a tiny electronic load cell
out of a cheap bathroom scale incorporated into the motor mount to
measure prop torque. Knowing prop torque and prop RPM you know HP
out of the gear box. The A to D system can measure that as well.
I got the idea by watching the TV program Deconstructed on the Science
Channel. I'll appropriate Robin's bathroomscale :)
-----------------------------------------------
Here are some pictures of the load cell in Robin's bathroom scale :)
I'll have to buy her a new one at $34.
It is battery powered for the life of the scale in that black container
behind the LCD read out.
I'll work on a 3D dwg for the mechanism for the end of the S-beam
motor mount. One side has all the load due to engine torque.
The 12 bit A to D has such a high res and a wide dynamic range
it does not matter if it is measuring the weight of the engine only
when the engine is not running. The trick is have it bottom out mechanically
so it does not damage the load cell during hard landings and high G pull up loads.
That would be like having an over 300 pound person standing on the scale.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.