"I want to make the runners that go from the intake plenum to
the throttle body. This requires a 180 degree sweep. Can
anyone tell me how to approach such a project. Or
recommend a good book on the subject."
"Jerry Hey"
"The idea is to create a tool that "disappears" inside a
locked shape. We use various types of mandrels but the most
common technique is to make a water soluble mandrel. There
really is no limit to the shapes."
"Here is a good source for the water soluble plaster."
http://www.acrtucson.com/
"Aquacore is about $100/5gal bucket as I recall.
I think it's corn starch w/plaster... shhhhh"
"Marinus B. (Ben) Bosma"
According to Ben Aquacore is plaster and
corn starch so I bought some and mixed them 50/50.
After I added water I pored it in a plastic cup.
I cut it out of the cup and yep it got fairly
hard. It is in the oven now at 200 F which is the recommended drying
temperature. I'll see if it dissolves in water after it drys thoroughly.
The next test will be two thirds plaster and one third corn starch
for a harder part.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.