Paul, anybody in our group used a good flow bench to
compare peripheral port exhaust vs RX-8 exhaust ports?
Steve Beckham
Not that I know about. I was pleasantly surprised that
the RX8 side exhaust port did not seem to hurt the RX8 p-port
power. The side exhaust port area is 17% larger than the
p-port exhaust area. Apparently with the high pressure
differential across the exhaust port the right angle has
less effect on the exhaust flow.
It certainly helps out on muffler life and noise.
Paul Lamar
Thanks Paul. The side exhaust ports obviously go a long way towards efforts
to tame the exhaust note while taking a large load off stresses on muffler
compared to peripheral exhaust ports. Was looking at possible use of a
p-port intake RX-8 configuration for next engine for testing. But at first
glance the flow path triggered a flashback to the inherent flow problems
associated with getting air through my old flat-head Ford/Merc. Do we know
if the Star Mazda and other Mazda race engines are using p-ports for both
intake and exhaust?
Steve Beckham
The Star Mazda engines were stock 4 side port RX8 engines initially I think
but I think they are now using six side port engines. You don't want
to give those 16 year old kids too much HP :) Also a 300 HP p-port
RX8 engine would give a Formula Atlantic car a run for its money :)
John Doonan will know.
Is that right John?
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.