Good Evening Everyone.

I have a couple questions,  Do you think I would be able
to use a Mazda Rotary in a Quickie Q2 200 ?  I ask because
I have an opportunity to purchase one minus the engine.  I
also need information on capturing the data shown bellow and
in the attached file as I am designing a glass cockpit for
it as well.  All of this data needs to go to a USB port.
I imagine I will find myself creating a board to translate
the signals but I thought I would ask.

Pitch & Roll
G - Meter

RPM
Oil Pressure
Volts
Amps
Fuel Pressue
Fuel Flow
Fuel Quantity L & R
EGT
CHT

Thanks for your input.

Barron

It is not advisable to use a 2 rotor Mazda engine in a Quickie as it would
weigh at least 300 pounds firewall forward while an O-200 is only about
200 pounds. If you can find sensors that output 0 to 5 volts
one of these $80 devices will work fine.

http://www.hytekautomation.com/

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.