Subject: Integrated oil cooler / radiator
From: Rotary Engine
Date: 6/18/2009, 5:41 PM
To: AAA Put this in the To box



Paul,
What's your opinion re. using the 'transmission side' of an integrated
radiator as an oil cooler? There are some beefier ones that have decent
volume, and it would eliminate the extra effort of mounting the standalone
cooler & fabricating a trumpet for it. With my slow-speed plane I'm using a
thermostat vs. a cowl flap, so it will always have air flow.

Seems obvious enough that someone must have thought of it before...


Thanks,
-- 

--Kenny A.
http://websites.expercraft.com/kennya/


Assume  for the moment you can find a rad system that will cool the oil
equal to one third of the total cooling required. Most built in
transmission coolers are nowhere near that effective.

You must increase the cooling air supply to the water so the total
cooling air required is the same as to separate water and oil coolers.
There is no free lunch.

If you get a leak in the water system the engine fails sooner than it
would if you still had oil cooling working.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.