Does anybody know what the RX-8 throttle body pin-outs are and the
voltages that the sensor/s needs ?
We are assuming there is a hall sensor in there somewhere being "Denso" it
appears they have done it
the hard way. We can simply want to use the throttle body as it is out of
the box rather than modify it to a cable

Regards David

Try this link David
http://foxed.ca/rx7manual/2003mazdarx8/


Paul Lamar
--


Thanks, got to spend awhile hunting through checking now and see what it
got to say :)

David

I think Tracy Crook is usng the RX8 TB un his RV8 on a 20B. He seems to have
all the details.
FWIW.

Richard Sohn
N2071U

Looks like it takes a computer to control it. It looks like
a closed loop servo system with data fed back from the throttle
position sensor. It is spring loaded to close to 5 degrees if
the electronics fail.

BTW how's your one rotor engine coming Richard. There appears to be a
fair size market out there.

Paul Lamar