Hello Paul
Measured the sound levels coming off the engine yesterday. Here's what
we recorded:
2500rpm - 97db
5500rpm - 112db
Sound levels were measured at a distance of 20 feet off the port side
of the cowling in line with the muffler. C weighting, slow response.
Mark (Rocky Mtn high)
Thanks for the data Mark.
That is not too bad for 20 feet.
Our standard is 30 feet so it should be be below 100 db at 5500 RPM at 30 feet.
We have recorded worse than 112 db at 30 feet.
As I recall you have a 2 inch down pipe. Area 3.14 square inch.
If you want to get it lower with no increase in back pressure
try two 1.5 diameter inch down pipes. Total area 3.5 square inches.
Do you have a blast tube on the muffler cooling pipe yet?
That tube might burn through if you don't get a blast tube
on it.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.