David...
I'm expecting you are wanting to use the tandem as a trainer. If so, then
you should seriously consider how a newbie is going to be trying to KILL you
while you are wrestling the throttle away from them!! On the three ships
I've built, the first (grey ship) had a really "neat" spring system to allow
the back seat to overcome the pressure of the front seat's input. However,
after real world experience, I've built the last two ships with mechanical
linkage between the seats, and a cable to the engine from the back seat.
I've realized I could overpower the front seat's inputs mechanically as long
as I also had positive communications.
No need to make the throttle system more complicated than necessary IMHO!!
Plenty of things on the gyro will be trying to fail... no reason to add yet
another to the mix if not necessary!!! The issue of mounting the seats
from the left side is moot to me... why is it so important to you???
The grey ship has the fancy box with cabling and springs... built by Bill
Parsons. (N69EF) The black frames were on Air Command Tandems. (N263GB)
The Blue/ Silver ship is the Mad Max tandem I've currently got.
Gary Buster
East Texas
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.