David...
I'm expecting you are wanting to use the tandem as a trainer. If so, then
you should seriously consider how a newbie is going to be trying to KILL
you
while you are wrestling the throttle away from them!! On the three ships
I've built, the first (grey ship) had a really "neat" spring system to
allow
the back seat to overcome the pressure of the front seat's input. However,
after real world experience, I've built the last two ships with mechanical
linkage between the seats, and a cable to the engine from the back seat.
I've realized I could overpower the front seat's inputs mechanically as
long
as I also had positive communications.
No need to make the throttle system more complicated than necessary IMHO!!
Plenty of things on the gyro will be trying to fail... no reason to add
yet
another to the mix if not necessary!!! The issue of mounting the seats
from the left side is moot to me... why is it so important to you???
The grey ship has the fancy box with cabling and springs... built by Bill
Parsons. (N69EF) The black frames were on Air Command Tandems. (N263GB)
The Blue/ Silver ship is the Mad Max tandem I've currently got.
Gary Buster
East Texas
--
Tandem Trainer - Certainly not to start off with, maybe some at stage
later
but, after flying off initial test hours there's some long cross country
flying to do first, 2 pilots on board, with dual controls one can rest or
take some video while the other has control.
The dual throttles are cable interconnected the levers were made for it
so I've used it that way.
Mechanical linkages on some machines, I have fallen over some of them a
couple
of times, got my foot stuck in some others because of my size 2 Metres I
have
trouble keeping my clod hoppers clear of them sitting in some machines,
regardless of whether they are Gyros or Fixed Wings nearly all are just
not
made for people my height, leg length and it gets flaming uncomfortable in
them.
Every machine I have ever flown/trained in I have had to wedge myself in.
There's just no-where near enough room it gets really painful after a
while.
Expanding a machine to cater for considerably bigger/longer person/s has
been
bit of a challenge, a lot things had to be designed to suit me on the
machine
just to cater for my size, that's made the machine longer, taller & wider.
It has presented some unique design challenges, so that people shorter
than
myself could still fly it and not ruin the balance of the machine. This is
simple in comparison.
Yes I'm using cables for other controls, but as I said before, TK wanted
to do
this, I have to give him a fair go, if it doesn't work then it will be a
cable
conversion.
Regards David
--
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.