Hi Paul

I would to purchase all blocks for the p port intakes,vacuum taps,injectors blocks.

The total cost to ship to Pompano Beach Fl,33064 and i will forward the money

I am converting one engine and test it and then building a second one for a twin canard project

I built total of  7 Velocitys ,the first RG and then Started the XLRG Project a the Factory
and built the plug

You can see the front page on Kitplane april 1999 The first Velocity XLRG300 and the article on me

Since that time it was always on my mind to built a twin Canard with your engines

I read all you articles and all e-mails in rotaryeng.com for the best knowledge
to convert these engines

Thank,s again for your help


Jean Prudhomme


Two blocks are about 3/4 pounds.
Send an extra five cash for the one fixed price flat rate parcel post shipping
box anywhere in the US for two blocks and two pressure taps.

Parcel PostR - Retail Weight Not Over
(Pounds) Zones 1 & 2 Zone 3 Zone 4 Zone 5 Zone 6 Zone 7 Zone 8
1           4.90         4.90   4.90   4.90   4.90   4.90   4.90

Put your return address on the envelope and I will cut that
off and paste it on the box.


Mail to:
830 East Santa Maria Street
Suite 303
Santa Paula CA
93060

A twin canard would be great.

Here is an oldie dwg on a twin canard using Wankel Gmbh engines :)
Anybody that wants one of these engines send email
Attention to Mario Haber Wankel-AG <mail@wankel-ag.de>
and tell him to get his act together and start selling these engines
again :)

Paul Lamar