Subject: Air France Airbus
From: Rotary Engine
Date: 7/5/2009, 10:45 PM
To: AAA Put this in the To box


 They are reporting today the plane
 was intact when it hit the water.
 Perhaps intact means everything except the tail, haven't
 found a
 clarification on that.

 Perry Mick


 30 miles is a long way for a vertical fin, lacking a sail, to
 move away from the main debris field. That is about three
 minutes flying time for the average airliner going 600 MPH.
 Airplanes have flown some distance without vertical fins. I
 also think the crash took place in an area of the ocean called
 the doldrums where there are few surface winds.  The crash was
 only about 5 degrees south of the equator.  This picture
 supports the lack of surface wind theory. There is no spray.

 Excepting thunder storms of course.  Any ocean current would
 also move the main debris field as well.

 Assuming the fin fell off in the air it would only take about 3
 minutes or so to hit the water from 30,000 feet assuming it
 fell at a modest 150 feet per second. Not enough time to blow
 very far away due to winds aloft.

 I don't think Air Bus could or would admit it broke apart in the
 air.  That would be the end of a lot airlines that use mostly
 Air Bus products. It would also be very damaging to Air Bus
 themselves needless to say.

 I wonder what independent organization would spend the huge
 amount of money necessary to recover the black boxes for an
 unbiased report on what really happened.  I don't see the NTSB
 doing it.

 Air Bus obviously believes the black boxes will never be
 found.

 If I were in charge of the NTSB I would take a close look at
 the design criteria of the Air Bus vertical fin compared to the
 design criteria for the Boeing vertical fin. If Air Bus does
 not cooperate in providing that info then that fact should be
 made public.

 I would also inspect all Air Bus vertical fins for de
 lamination signs and conduct water submersion with subsequent
 freezing cycles.


 In the mean time I would also think twice about flying on
 an Air Buss  product :) I don't envy the pilots that are
 forced to fly them.

 Paul Lamar



 Apologies in advance for some of my frank statements, but
 some of this touches a nerve...

 Speaking as one of said pilots, I think you are spot on. We
 deserve pity, in fact most
 airline pilots seem to think they do! ;)

 Just my two cents in the Boeing vs. airbus debate. I have
 experience on both schools
 of thought (737NG vs A320 series). Firstly, the battle goes
 to the Boeing, hands down.
 Any one who says different is either a hypocrite or they do
 not know anything about flying.
 There are less buttons to push on a day out in the ībus
 and it has a few nice features.
 That is what is to be said for it. Everything else the
 Boeing does better and safer.

 The airbus is marketed as an aircraft that is so advanced
 that it is supposed to be very
 simple to operate and therefore lessen training
 requirements. This is a grave
 misunderstanding perpetuated by the airbus marketing
 department. The fact of the matter is
 that the system is so complex, that it has contaminated
 itself.

 On a Boeing, if one pushes a button, one can be quite sure
 what the consequences will be.
 On an airbus there is so much what I call
 cross-contamination in the FMS/FGS, so knowing all
 the consequences of one push of a button takes a long time
 and only comes with experience.
 Very very Poor design if you ask me. The controls are not
 for one second intuitive.
 It is an engineers airplane, and as such it will not
 cooperate if things do not go exactly
 according to plan. Which of course they rarely do in
 aviation.

 One very important thing when it comes to airliner flight
 management systems is called
 mode reversions. When a selected auto pilot or flight
 director mode no longer is valid
 the system reverts to another one. These reversions should
 be designed so that to the greatest
 possible extent they are safe and will not require
 immediate crew intervention. Not so on the ībus.
 In certain scenarios it does the strangest things and if
 one wants to avoid that big round blue and
 green thing one has to react. Poor design.

 The Boeing NG is far from perfect (mainly due to some nay
 sayers at Southwest), but you get
 what you pay for when you fly it.

 The ībus is all the fine print that none can be bothered
 to read.
 It should never have been certified under the current
 circumstances. A redesign of the aircraft and
 its systems, or at least of the training syllabus is what
 is needed. To me it is evident that many
 pilots can not handle the aircraft when things start to go
 wrong, because it is supposedly so "easy"
 to fly when it works. Well, first of all, its not. Its just
 different, conventional aircraft are just
 as easy plus one gets to trim them to ones own personal
 liking. What it does though, is turn into a
 bitch once in a full moon. This is when some computers
 fail, and one ends up with direct law. Now the
 airplane is totally conventional, even with manual trim
 flown by a pilot who hasnīt flown a proper
 aircraft since IR training. In my mind it would be far
 better if the system was constantly in
 direct law when the autopilot is off, and presto, one
 dangerous reversion gone! Plus one gets
 better pilots thrown in for free.

 That is just the ergonomics of it all. Dont get me started
 on the structural bit. I know of a 737NG
 that was close to 100 knots into the barber pole (above
 Vmo), due to poor piloting during an end of lease
 test flight where procedures require all hydraulics to be
 shut down. An out of trim situation placed
 the aircraft in a dive.
 No structural problems were encountered to my knowledge. I
 for one would not have liked to parallel
 that maneuver in a 320.

 JMHO

 Chris

The 2001 crash of the AirBus out of NY also lost it's Vertical Fin.
see the attached article.

Joel




-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.