Subject: Torsion damping for turbo-compound
From: Rotary Engine
Date: 7/5/2009, 5:54 PM
To: AAA Put this in the To box


Enjoyed your article in Kitplanes,  I work for s  Detroit diesel
facility and on our new dd15 engines we are using turbo-compound,  the
compounding off the turbo goes through fluid drive to trans, adding 50
hp.  Realize the engine is a bit heavy for a kit plane at 2500 lbs., and
this technology may give one a starting point.  The fuel mileage has
gone up approx 2 to 2.5 miles per gallon, On a Semi Truck this is big.
The average semi is license for 80,000 lbs so to get an extra 600 miles
out of the same fuel tanks is a big deal. Most semis us two 150 gallon
tanks total 300 and usable about 270 gallons.  Maybe some of your
readers and associates might investigate and watch and see how the
technology is working. Getting more out of the same resource is usually
better.


Thanks

Dale  McKinney.

Hello Dale,

I hope you can answer this question for me. Why is a fluid coupling used
on the turbocompound?
Wouldn't it be possible to filter out the torsional vibrations with a
torsion damper similar as used on manual transmissions so that you have
better efficiency?



Regards from Randolph in Paris, France

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.