Subject: 2nd gen aluminum water pump
From: Rotary Engine
Date: 7/11/2009, 11:53 PM
To: AAA Put this in the To box


 Steve Beckham came up with this after market water pump
 cartridge. Saves 2 or 3 pounds.

 Paul Lamar

 COULD YOU ASK STEVE WHERE WE CAN BUY THIS PUMP AND HOW MUCH

 Jean Prudhomme



--------------------------------------------------------------------------------

This Japanese-made aluminum aftermarket water pump trick came from a friend
of mine, Chuck Smith, who rebuilds rotary engines, Fords and Jaguars at his
shop,  Chuck's Auto, in Bend, Oregon.    Chuck is helping with the engine on
our rotary-powered RV-3 project.  He is a bonafide character and and always
drives around in his 1970's stock rotary engine Mazda pickup rather than his
Jaguars. Chuck @ his shop is 541-382-4381.  Don't remember the price but do
remember it was surprisingly reasonable. His shop is next door to a Mazda
dealer.  Other great resources in our area are guys I've known for years,
Dave Atkins at Thun Field in WA and Rob Golden @ Pineapple Racing here in
Portland.

Steve  Beckham

These are well worth the $45 bucks folks so snap them up while you can.

Paul Lamar (at PDX)





GMB is one of the big makers of after market water pumps and
u-joints..  Any auto parts place that sells GMB should be able to
order one for you.  It's listed on page 4 in their catalog here:

http://www.gmb.net/html/products/waterpumps/2009_WP_PictureBook02.pdf


Matt-


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.