Subject: 2nd gen aluminum water pump
From: Rotary Engine
Date: 7/12/2009, 9:55 PM
To: AAA Put this in the To box


    Steve Beckham came up with this after market water  pump
    cartridge. Saves 2 or 3 pounds.

    Paul Lamar


  Paul,
     Where did he get it?  The web site on the box doesn't have any
  retail suppliers listed.
  Blake

  Yes I am trying to find out. It is a big company and I sent
  them email. I will hit them up for sponsorship money for
  the racer in exchange for a decal on the RV3 :)

  Paul Lamar


That's an early RX7 Water Pump.

gmb 145-1180   is the part number.
Description:
Description: Standard Pump / Water Pump;Eng Code 12A, 13B ; OE# 8872-15-010B;
Years: 1984-1985;Qty Per Vehicle:1;

Google does list multiple suppliers (I just haven't dealt with any of
them.  Does anyone know of a Mazda Specific online dealer (i.e. all my
Honda parts I go to Majestic Honda... OEM at 25% discount)

Tom

http://www.rotaryeng.net/part.html
http://www.mearsmotors.com/

Mention the rotary engine newsletter to the parts manager.
Bob Mears is building a 3 rotor scale spitfire.

Paul Lamar


Steve

Two questions.  What is the maximum water flow on the unit as mounted on
the engine with its accompanying flow restrictions?    Is the rear of
the water pump a  simple flat plate with inlets and outlets installed?
I see you mounted it down in the southeast corner of the engine
accessory side.  Smart.

Thanks


Doug in Japan.

Stock pump in stock location. Only the output port has been modified.
The weird motor mount is fooling you :) Only the cartridge is different.
Same water flow as stock.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.