Hi Paul

I am ready to send you money  for those PPort sqare blocs
and i want to know if you still sell those twin  injectors blocs and how
much

Jean Prudhomme

I am out of those  but I can have some made if some other people
want them as well.

How  many want twin injectors mounts for two inch OD intake
runner  tube?

Paul Lamar

I'll take a set if ya make 'em.
C.  Smith



Paul,
I'll take 3 for my 20B

Don Mitchell

Ok it would be wise to do them for the RX8 smaller diameter injectors
like Doug is describing. That seems to be the trend.

Paul Lamar


These are the injectors I have, are they what Doug is describing? Blake
also
has them as he purchased the remaining set of 4 I had.
C. Smith


Those are 2nd gen injectors Craig.
You can get the weld on bosses from Kinsler for those.

Our new dual block will be for the ones Doug recommends and the
RX8 size injectors.

Paul Lamar


Paul,
I think the corvette injectors that I have may fit the holders that you
designed for RX8 stuff.  It is funny that I was just going to start to build
them based on the HKS dual injector holder design.  Put me down for 2

Joe Berki
Limo  EZ

Send me a picture of what you have and the dims so I can be sure they
will fit.


Paul Lamar