Phillip Groelz is building a cast aluminum front cover incorporating
Lycoming motor mounts much like the Mistral version.
Add some bosses on there Phillipe to mount my ignition
and fuel injection crank angle sensors :)
I talked to Steve Roth who was piloting when the
Mistral Piper Arrow crashed and he said the front cover did not break but
the motor mount was bent. Always good sign. Means the front cover can take
it.
Here are some pictures of the wood patterns and the Mistral version for
comparison. I like the idea that Phillip is using the stock Mazda water pump
cartridge.
Paul Lamar
------------------------------------
Paul, and Phillip!
Sign me up for a couple (or 3) of those castings! Try and make sure they fit
all versions of the 13B and 20B's, the 20B larger water pump, have acc pads
(cs prop pulley driven pump), etc! (I have mostly 13B REW and 20B
engines-the AT engines have a different bolt/starter layout, as does all the
20B's as they were ALL AT only). In any case.
I suspect that this mount is the typical "dynafocal" Lycoming style used on
the Lyc O and IO360's like in some of the Piper Arrows? If so, I have this
MM hanging from my hangar ceiling. I was waiting for this to happen.....and
didn't want to deal with Mistral......
Any idea on a price and when?
Marc Wiese
Sign me up as well. I'm at least a year behind with doing the same thing.
Had thought of purchasing a complete Mistral engine just for the chance
to measure and CNC that front plate. If it's engineered to handle the
loads of up to and including a 4 rotor you should have no problems
getting customers. Price and timeline would be great.
Greg Fleming
London, Ontario, Canada
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.