July 13-09
 Hello Paul;

 Thank you for your email.
 Our 145-1180 was the big seller for the classic RX-7 in the US.
 If you own other model,  please contact our office in the US;

 Adrienne Tamberg
 Assistant Manager
 GMB North America, Inc.
 email address ;  atamberg@gmb.net

 609-655-2422 x111
 609-655-2257 Fax

 Kind regards - Shuji Kuwamura

 Deputy Chief, Sales HQ / OE Development Team
 GMB CORPORATION, JAPAN
 Dial in +81-745-44-1913(Sales)
 +81-745-44-1930(fax)
 email :  kuwamura@gmb.jp
 Your Success is Our Future

 -----Original Message-----
 From: Rotary Engine [mailto:rotaryeng@earthlink.net]
 Sent: Friday, July 10, 2009 10:53 PM
 To: gmb@gmb.jp
 Subject: Water pump for Mazda RX7

 Dear Sir,

 Where can we buy your water pumps for the RX7
 in the united states.

 Thank you,

 Paul Lamar

Paul,

I tried Mears Motors and was told that they are not a distributor for GMB.

I have confirmed that Summit Racing is a distributor for GMB.  I placed an
order for myself for (2) of the gmb 145-1180.  They confirmed that they are
alum. and the price was $34.39 ea plus freight.

As this was not an item in Summit's computer system, they in turn contacted
GMB,
who shows them due into their stock in 4-6 weeks.

Gordon at Summit advised me that they have updated their computer system to
include this item.  Their phone number is 1-800-230-3030.

I found the water pump housing in one of the attachments from Steve Beckham
intriguing, but haven't yet had any luck in locating it.  If Steve could
enlighten us with the year and part number it would be appreciated.

Joe Graham

I think you are talking about the home made housing part. Steve made
it look professional by grinding and polishing the welds.

Here is another way of doing it. The whole idea is to get rid
of the unneeded thermostat housing, make the pump low profile
and remove the water flow restriction on the outlet side of the block.


-----------------------------------------------------

Here is another one I did for Bulent's Cosmo engine.
Don't get any ideas. I don't do these anymore. No time for it.
It is only worth doing if you have a clearance problem under
the cowl. The RX8 engine solves the problem as the water
comes out on the side of the front cover.



Paul Lamar


Thanks Paul,

We certainly appreciate your efforts.

J.G.