I just got done mailing a bunch of stuff PP.

The post office has a 44 page 8.5 by 11 fine print booklet on postage
rates.

They also have a Priority $5 flat rate box 8" by 5" by 2" up to 70
pounds anywhere in the states.

For example 2 sealing blocks to Ohio from CA would cost $5 in the
Priority flat rate box and $17 express mail.

The post office is trying to simplify and standardize to cut cost.

I am going to do the same thing. For example you can get two sealing
blocks, two injector blocks, two bell mouths and two pressure taps
shipped anywhere in the US all for $5.

So send $5 for postage and you won't have to figure it out, go to the PO
to get the postage and I won't have to wait in line at the PO quite so
long :)


Paul Lamar

Paul
I already sent the $$ for the Sealing Blocks and I was about to send
$$ for the Pressure Taps so I'll add another $10 to cover the sealing
blocks also. If you haven't sent them (the Sealing Blocks) let me know
and I'll just add $5 and you can send it all together. I also wanted to
get a set of the Injector Blocks when they are done, if you know how
much they are I'll go ahead and add that as well.

Mike C.

The sealing blocks went out Mike. Not to worry.
I am still thinking about those injector blocks.

How many people are interested in dual injector block for the RX8 and
Siemens
skinny injectors? It won't take long to make them as
the NC shop is idle.

Paul Lamar

Paul,
Put me down for 2 I will not use the Vette injectors but look for the
siemens. I will also take 2 bellmouths. Thanks

Joe Berki
Limo EZ

4 Blocks for me RX-8

Jean Prudhomme