Paul,
Do you, or anyone on this list, have a spare 20B primary fuel rail you
aren't planning on using? I'm referring to the one that bolts directly to
the engine and accepts the side feed injectors.
Thanks,
Mark S.
Austin, Tx
I have one but I don't want to sell it as my 20B is stock and complete.
Are you still planing on using those side feed injectors?
What is it you like about them?
I suspect they are high capacity throttle body injectors and you might
find a truck version that fits. Throttle body injectors were
used on GM products for awhile as I recall.
Yvon Cornoyer has been flying for years with one of these things.
Paul Lamar
Paul,
What I like best about the side feed injectors is that I have 6 and they're
paid for. ;-)
I was looking at the 20b primary fuel rail last night and it looks like I
could cut the "paired" sections off of three fuel rails to use for my p-port
engine. (I already have two fuel rails) That would give me a pair of 550cc
injectors on each runner. All it would take would be to cut off the third
injector and weld AN fittings on each side of the paired set. I wouldn't
need a fuel rail either as I would use ss flex hose. It would require the
fabrication/purchase of six aluminum bungs, but those are easy enough to
come by.
Mark S.
What is the center to center spacing on the paired injectors?
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.