Paul
Progress has been slow.however we have completed the combustion air inlet.
We made two fibre glass tubes the inner about 80mm and the outer 90 mm diam.
The inner obviously protrudes thru the cowl while the outer butts against
the outer surface of the cowl. This allows for a nice 2.5mm radius
inside and out at the entrance. We are hopeful this will cause minimum drag.
Kind regards
Bob and Steve
Down under
Nice fiberglass work guys.
Here are some more pictures I took.
Steve and his dad Bob are doing a major rework of the Glassair
retract cowling area to better suite the RX8 engine
they are installing.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.