Skinny injector blocks almost ready to ship.
Monday or Tuesday next week.
This corrects some of the problems we had with
the fat injector blocks.
Namely more room for the connectors.
They don't weigh as much either.
BTW of you do a good etching job on the metal parts you can bond them
on with JB Weld or epoxy. Get the etching kit from West Marine
or other boat stores. There several square inches of area
here so epoxy is about 3000 pounds per square inch shear
strength.
"860-8 Aluminum Etch Kit
A two-part treatment for preparation of aluminum surfaces for
bonding with epoxy. Our research shows adhesion to aluminum
is significantly improved with this process.
Also improves paint adhesion.
Two 1/4 pint bottles (treats about 50 sq. ft.)"
If in doubt tig weld them on.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.