I am thinking of setting up a system where
we bore the holes and weld in the SS tubes for you.

We need to do ten at a time to reduce the set up cost.

If people send me their rotor housings
I will save them until we have ten or more and then have the
work done. You will need to label your rotor housings
with your name and address and the date before you send
them to me.

In the meantime I will publish the number I have accumulated in hand
so people will get an idea when theirs will be shipped back
to them. You pay shipping cost to and from. If six months
goes by and we don't have ten I'll ship your rotor housings
back to you if you wish.

You use a die grinder or small drum sander to finish the weld
to your satisfaction.

What do you all think?

Paul Lamar



I'm interested.  I've got 3 ports from a 20b.  I know of two other friends
that may be interested.

Rick Irwin


I may be interested if I know the price.
C. Smith


As soon as we get some interest I'll talk to my bud about
price. My guess is about $150 each but that could be high.

Paul Lamar

I'll say a go if that's +- $50 ball park. Could I get a credit for supplying
my own ST tubing? Bought some already.
C. Smith


You could send me the SS tubing and I will put it in with the batch I would have
cut on the NC mill. I intend making up a bunch of the short SS tubes
contoured to fit the inner wear surface on an NC mill. That would cut
the time needed to hand fit this part to the inner wear surface contour.


Paul Lamar