I am thinking of setting up a system where
we bore the holes and weld in the SS tubes for you.

We need to do ten at a time to reduce the set up cost.

If people send me their rotor housings
I will save them until we have ten or more and then have the
work done. You will need to label your rotor housings
with your name and address and the date before you send
them to me.

In the meantime I will publish the number I have accumulated in hand
so people will get an idea when theirs will be shipped back
to them. You pay shipping cost to and from. If six months
goes by and we don't have ten I'll ship your rotor housings
back to you if you wish.

You use a die grinder or small drum sander to finish the weld
to your satisfaction.

What do you all think?

Paul Lamar


Do you have an idea how much it will cost and does it will include the aluminum facing square

Jean Prudhomme

No the user will need to get the block and fit them to the engine before
he sends it to us for boring. As I said my guess is about $150 each or somewhat less.
I'll know in a couple of days after I talk with my bud.

Paul Lamar