I am thinking of setting up a system where we bore the holes and weld in
the SS tubes for you.

We need to do ten at a time to reduce the set up cost.

If people send me their rotor housings
I will save them until we have ten or more and then have the work done. You
will need to label your rotor housings with your name and address and the
date before you send them to me.

In the meantime I will publish the number I have accumulated in hand so
people will get an idea when theirs will be shipped back to them. You pay
shipping cost to and from. If six months goes by and we don't have ten I'll
ship your rotor housings back to you if you wish.

You use a die grinder or small drum sander to finish the weld to your
satisfaction.

What do you all think?

Paul Lamar



 I'm interested.  I've got 3 ports from a 20b.  I know of two other friends
 that may be interested.

 Rick Irwin


 I may be interested if I know the price.
 C. Smith


 As soon as we get some interest I'll talk to my bud about
 price. My guess is about $150 each but that could be high.

 Paul Lamar


Paul, $150 is a bargain. I paid $300 ea and had to hold his hand while he
did it.

Rick in Alaska

That is the advantage in doing ten at a time. It takes far longer to set up
the mill than it takes to bore the holes. Also one needs the right cutting
tools. A humongous end mill helps :)

Paul Lamar

Paul--
I'll be more than happy to send you a pair of housings for a 91-13B turbo.
(They'll  be used with n0n-turbo rotors in a NA p-ported  final version.
Just say when and where to ship them and the cost to do the work.   Thanks
for solving a major problem for those , like myself, who have neither the
equipment, nor the necessary skills.

Paul Vermillion

Don't ship until after OSH.

Paul Lamar
C/O of Light Speed Engineering
416 E. Santa Maria Street,
Hangar #15, Santa Paula, CA 93060

Paul Lamar