Subject: Interesting p-ports #3
From: Rotary Engine
Date: 7/28/2009, 10:33 PM
To: AAA Put this in the To box



Paul,

This is how the position jig that holds the housing looks like.
Inserting and removing the pins allows for two positions to be cut.  The
pins of course insert into the housing dowel holes. The retaining bolts
go through the housing to catch a bar.  When I do a new housing I will
use a plastic sheet under the retaining bar to prevent marring the
housings. The hole boring positioning jigs have a thin rubber sheet on
the inside of them.  Dual purpose should be obvious.

Doug in Japan.


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.