Paul,
An excellent technical reference related to Heat Engines is "Mechanics and
Thermodynamics of Propulsion" by Hill and Peterson, Addison-Wesley, 1970.
Like many texts of this type, Peterson & Hill relies heavily on mathematics.
Unfortunately, many propulsion systems involve phenomenon which are not
necessarily very intuitive in nature and one must often turn to mathematical
expressions to gain some understanding (but not necessarily intuition) into
what is happening.
An relatively simple example of this is chocked flow of a perfect gas
through a nozzle. It turns out this occurs when the gas flows at Mach 1
through the nozzle's throat. Now, there are many conditions related to this
analysis, such as it is frictionless (isentropic) flow, but I don't want to
go into all of them here.
The point is that it is not intuitive that the maximum flow of mass through
the nozzle, under these conditions, occurs at Mach 1. But when the math is
done, and the resulting expressions and graphs are examined, it becomes
clear that this is the condition for maximum mass flow rate.
This text also addresses phenomenon more closely related to TC engines, such
as the basics behind extracting work from the expansion of a gas through a
turbine, etc.
I mention all of this because some of your newsletter readers, and you, may
be interested in delving deeper into the analysis of Turbo Compound Engines.
By the way, and before I forget, an excellent website all of your readers
should visit is
http://hyperphysics.phy-astr.gsu.edu/hbase/HFrame.html It
contains great, educational information on physics topics, including very
instructional interactive graphs related to all sorts of thermodynamic
cycles and engines. It was created at Georgia State University and is used
to teach physics in High Schools and Universities. And if you really like
it, you can purchase an interactive CD containing everything on the site for
about $50.
Best of all for many of your readers, it doesn't rely much on mathematics.it
does it mostly with interactive graphs and examples!
Go to the site and then click on "Heat and Thermodynamics". Next, click on
"Heat Engines".
In this section are simple, clear examples of the various engine cycles
(i.e. Otto, Carnot, etc.).
BOTTOM LINE.Don't pass up the opportunity to look at the site!
Feel free to pass this along.
George
Woodland Hills/Santa Paula, CA
www.mig17.com
Paul,
Shame on me!
I should have proof read my previous message for grammatical and spelling
errors. Obviously I meant to say "choked flow", not "chocked flow", and "A
simple example", not "An simple example". But, then again, were among
forgiving fiends and this isn't an English class!
Regardless, I want to once again emphasize that it's worth everyone's while
to go to the website I mentioned if they'd like to become more knowledgeable
about the physics behind heat engines....not experts, but certainly more
knowledgeable.
That website can be found at:
http://hyperphysics.phy-astr.gsu.edu/hbase/HFrame.html .
Did you go to it????
George
Woodland Hills/Santa Paula
www.mig17.com
Yes I went. What does it say about global warming?
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.