Here's another screen shot. I have found that parts of the drawing are
genuine solids, others are just 3d line drawings.
Decker, Michael
Paul, these are just used for development gear teeth the dowel pin slot and
thickness of the bearing shell are not included. These things are used to
locate bolt holes through the 1/2" of aluminum into the iron part of the
side housing and set the rotation of the bolt pattern. there are two "O"
rings and another ring of bolts around this bore and the solids inserted
onto the 2D drawings just make it eacer to draw the rest. Sort of form
follows function.
george grimes
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.