Subject: Correction RE: Major set back and dissapointment
From: Rotary Engine
Date: 8/2/2009, 4:46 PM
To: AAA Put this in the To box



 Craig Smith wrote:
 I spent the morning finishing the teardown of my motor only to find that
 the
 side housings and irons all show wear patterns and chipping, that would
 preclude their re-use.

 It has been too long that I really don't think the engine seller would
 honor
 an exchange or some form of restitution.

 Any 13bs for sale? Side housings?

 I don't know if the irons can be re-lapped?

 I'm really bummed out.

 C. Smith

 Mazdatrix can relap them. What year is the engine?

 Paul Lamar


 Let me guess, you bought the engine from Dave Atkins.
-- 
David Leonard

Turbo Rotary RV-6 N4VY
http://N4VY.RotaryRoster.net
http://RotaryRoster.net

Not sure who Dave Atkins is, but I bought this from an outfit out of New
Jersey, can't recall the name at the moment. Have to dig through records.
They advertise heavily on eBay.
So since the engine had only one turbo, it must be '85-92 vintage.
Now here is a question for the experts, since I'm not going turbo, and we
are P-porting, won't any 13b rotor housing work? Or were there other
differences that are more subtle.
C. Smith

Just about any 13B rotor housing will work.
The later the better up to 2003.
Best if it is a 89 or later.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.